Length "L" of the gearmotor as a funtion of reduction and outlet number of revolution with the standard motor
977 120 output W 3300 Rpm loadness, 12/24 Vdc. Starting corrent 25 A.
Driving shaft supported by self lubrificanting bushings. Outlet shaft supported by two coupled screened bearings. The
motor and the reduction gear are both plated for corrosion strength.
Connecting 2 wire 1 x 300 mm.
* The rotation speed can change of ±10%.
The S1 load test was made using a 3,8 A corrent in the air with an increase of temperature of 70° C.
The S2 test was made using a 7,5 A corrent in the air with a 50% timing 5`with an increase of temperature
of 80° C max.
The starting corrent (I max) cannot be maintained for more than 2".
Max forces which may act on the outlet shaft: Axial 30 kg, Radial 40 kg on the extremity of outlet shaft.
Possibility to apply other motor.